Clear The Man-Laser-Restart Condition - Cisco NCS 2000 series Troubleshooting Manual

Clear the MAN-LASER-RESTART Condition

Clear the MAN-LASER-RESTART Condition
SUMMARY STEPS
1. Set the ALS Mode to a value different from Manual Restart or Manual Restart for test.
DETAILED STEPS
Set the ALS Mode to a value different from Manual Restart or Manual Restart for test.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
MAN-REQ
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: EQPT
The Manual Switch Request condition occurs when a user initiates a Manual switch request on an OC-N/STM-N
port. Clearing the Manual switch clears the MAN-REQ condition. You do not need to clear the switch if you
want the Manual switch to remain.
Clear the MAN-REQ Condition
SUMMARY STEPS
1. Complete the
DETAILED STEPS
Complete the Initiate a 1+1 Manual Switch Command, on page 444
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
MANRESET
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: EQPT
A User-Initiated Manual Reset condition occurs when you right-click a card in CTC and choose Reset.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
300
Initiate a 1+1 Manual Switch Command, on page 444
http://www.cisco.com/c/en/us/support/index.html
procedure.
procedure.
http://www.cisco.com/c/en/us/support/index.html
Alarm Troubleshooting