Cisco NCS 2000 series Troubleshooting Manual page 597

Error Messages
Error/Warning
ID
EID-6360
EID-6361
EID-6362
EID-6363
EID-6364
EID-6365
EID-6366
WID-6367
WID-6368
EID-6369
EID-6370
WID-6371
EID-6372
WID-6373
EID-6374
Error/Warning Message
The fiber cut restore operation did not succeded on {1}.
{0}
The resource is already in use, please retry later.
Request timed out, please retry.
An internal communication error was encountered while
retrieving values. Please retry.
Could not perform the requested operation because of
a CRS communication error.
Could not perform the requested operation on PLIM
{0} because that port is already in an LMP data link
with neighbor {1}.
The IP address {0} was not found in the CRS ARP
table.
This operation will also change the CRS configuration.
Is it OK to continue?
This operation will also change the Router
configuration.
Moreover, it requires the PLIM shutdown and may be
SERVICE AFFECTING.
Is it OK to continue?
The rollback operation has failed.
The requested operation is not authorized on {0}. Please
check task privileges.
Since you have changed the IP address of one node
containing Server Trail terminations, you should also
fix the IP addresses stored in the nodes connected by
these Server Trails.
Run the Server Trail Repair tool to fix these IP
addresses.
A Server Trail with the requested ID and old peer IP
Address does not exist.
AIS Squelch action(a link Integrity attribute) should
not be simultaneously set
The selected SVLAN is already used for MVR.
Description
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
Error Messages Reference
551