Clear The Voa-Ldeg Alarm - Cisco NCS 2000 series Troubleshooting Manual

Alarm Troubleshooting
The VOA Low Degrade alarm is raised on DWDM cards when an equipped VOA does not reach the setpoint
due to an internal problem. The alarm indicates that the attenuation has crossed the low degrade threshold.

Clear the VOA-LDEG Alarm

SUMMARY STEPS
1. Complete the
DETAILED STEPS
Complete the Physically Replace a Card, on page 453
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
VOA-LFAIL
Default Severity: Critical (CR), Service-Affecting (SA)
Logical Objects: AOTS, OCH, OMS, OTS
The VOA Low Fail alarm is raised on DWDM cards when an equipped VOA does not reach the setpoint due
to an internal problem. The alarm indicates that the attenuation has crossed the low fail threshold. The card
must be replaced.
Clear the VOA-LFAIL Alarm
SUMMARY STEPS
1. Complete the
DETAILED STEPS
Complete the Physically Replace a Card, on page 453
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html
en/us/support/web/tsd-cisco-worldwide-contacts.html
your country.
Physically Replace a Card, on page 453
procedure for the alarmed card.
Physically Replace a Card, on page 453
procedure for the alarmed card.
to obtain a directory of toll-free Technical Support numbers for
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
procedure for the alarmed card.
http://www.cisco.com/c/en/us/support/index.html
procedure for the alarmed card.
for more information or log into
Clear the VOA-LDEG Alarm
http://www.cisco.com/c/
433