Cisco NCS 2000 series Troubleshooting Manual page 552

Error Messages Reference
Error/Warning
ID
EID-3170
EID-3171
EID-3172
EID-3173
EID-3174
EID-3175
EID-3176
EID-3177
EID-3178
EID-3179
EID-3180
EID-3181
EID-3182
EID-3183
EID-3184
EID-3185
EID-3186
EID-3187
EID-3188
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
506
Error/Warning Message
You cannot delete this card: {0}.
An error occurred while creating the trap destination.
No RMON thresholds were selected.
The contact ''{0}'' cannot exceed {1} characters.
The description ''{0}'' cannot exceed {1} characters.
The operator identifier ''{0}'' cannot exceed {1}
characters.
The operator specific information ''{0}'' cannot exceed
{1} characters.
The node name cannot be empty.
The node name ''{0}'' cannot exceed {1} characters.
The protect card is in use.
The 1+1 protection group does not exist.
The Y-cable protection group does not exist.
The topology element is in use and cannot be deleted
as requested.
An error occurred while deleting the protection group.
No {0} was selected.
This ring has an active protection switch operation and
cannot be deleted at this time.
The node is busy: {0} is {1} and cannot be deleted as
requested.
An error occurred while deleting the trap destination.
An error occurred during authentication. The password
entered is invalid.
Error Messages
Description
Refer to the error message text.
CTC encountered an error creating the
trap destination.
Select an RMON threshold.
The specified contact exceeds the
specified character limit.
The specified location exceeds the
specified character limit.
The specified operator identifier
exceeds the specified character limit.
The specified operator specific
information exceeds the specified
character limit.
The specified name is empty.
The specified name exceeds the
specified character limit.
Refer to the error message text.
Create a 1+1 protection group.
Refer to the error message text.
You cannot delete the topology
element which is in use.
CTC encountered an error while
deleting the protection group.
You must select an item before
completing this task.
Refer to the error message text.
The request cannot be completed.
CTC encountered an error deleting the
trap destination.
The password you entered is invalid.
Enter the password again.