Gfp-Csf-Sigloss - Cisco NCS 2000 series Troubleshooting Manual

Hide thumbs Also See for NCS 2000 series:
Table of Contents

Advertisement

Alarm Troubleshooting
Step 2
For the TRUNK-RX port, double-click the card and click the Performance > OTN PM > FEC PM tabs. If post-FEC
errors are present, troubleshoot this problem first. If not, move to next step.
Step 3
Verify the status of far-end TXP/MXP connected to the faulty near-end card. Look for any alarms reported by the Client-Rx
port of far-end card. If these alarms exist, troubleshoot them.
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at
http://www.cisco.com/c/en/us/support/index.html
en/us/support/web/tsd-cisco-worldwide-contacts.html
your country.

GFP-CSF-SIGLOSS

Default Severity: Major (MJ), Service-Affecting (SA)
Logical Object: GFP-FAC
The GFP Client Signal Fail due to Sigloss is a secondary alarm raised on local GFP data ports when a remote
Service-Affecting (SA) alarm causes invalid data transmission. The alarm is raised locally on AR_MXP and
AR_XP GFP data ports and does not indicate that a Service-Affecting (SA) failure is occurring at the local
site, but that a SIGLOSS alarm caused by an event is affecting a remote data port's transmission capability.
Clear the GFP-CSF-SIGLOSS Alarm
SUMMARY STEPS
1. Clear the Service-Affecting (SA) alarm at the remote data port.
DETAILED STEPS
Clear the Service-Affecting (SA) alarm at the remote data port.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
GFP-CSF-SYNCLOSS
Default Severity: Major (MJ), Service-Affecting (SA)
Logical Object: GFP-FAC
The GFP Client Signal Fail Due to Syncloss alarm is a secondary alarm raised on local GFP data ports when
a remote Service-Affecting (SA) alarm causes invalid data transmission. The alarm is raised locally on
AR_MXP and AR_XP GFP data ports and does not indicate that a Service-Affecting (SA) failure is occurring
at the local site, but that a SYNCLOSS alarm caused by an event such as a pulled receive cable is affecting
a remote data port's transmission capability.
for more information or log into
to obtain a directory of toll-free Technical Support numbers for
http://www.cisco.com/c/en/us/support/index.html
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
GFP-CSF-SIGLOSS
http://www.cisco.com/c/
215

Advertisement

Table of Contents
loading

Table of Contents