Cisco NCS 2000 series Troubleshooting Manual page 548

Error Messages Reference
Error/Warning
ID
EID-3103
EID-3104
EID-3105
EID-3106
EID-3107
EID-3109
EID-3110
EID-3111
EID-3112
EID-3113
EID-3114
EID-3115
EID-3116
EID-3117
EID-3118
EID-3119
EID-3120
EID-3121
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
502
Error/Warning Message
The IP address {0} is invalid}.
The router priority must be between 0 and 255.
The router priority is invalid.
The hello interval must be between 1 and 65535.
The hello interval is invalid.
The dead interval must be between 1 and 2147483647.
The dead interval must be larger than the hello interval.
The LAN transmit delay must be between 1 and 3600
seconds.
The transmit delay is invalid.
The retransmit interval must be between 1 and 3600
seconds.
The retransmit interval is invalid.
The LAN metric must be between 1 and 65535.
The LAN metric is invalid.
If OSPF is active on the LAN, no DCC area IDs may
be 0.0.0.0. Please change all DCC area IDs to
non-0.0.0.0 values before enabling OSPF on the LAN.
If OSPF is active on the LAN, the LAN area ID cannot
be the same as the DCC area ID.
An error occurred during validation.
No object of type {0} was selected for deletion.
An error occurred while deleting {0}.
Error Messages
Description
The IP address is invalid.
The router priority should be in the
range of 0 to 255.
The router priority is invalid.
The hello interval should be in the
range of 1 to 65535.
The hello interval is invalid.
The dead interval value must be
between 1 and 2147483647.
Refer to the error message text.
The LAN transit delay should be in
the range of 1 to 3600 seconds.
The transmit delay is invalid.
The retransmit interval should be in
the range of 1 to 3600 seconds.
The retransmit interval is invalid.
The LAN metric should be in the
range of 1 to 65535.
The LAN metric is invalid.
Refer to the error message text.
LAN must be part of a different OSPF
area other than the DCC network.
CTC was unable to validate the values
entered by the user. This error message
is common to several different
provisioning tabs within CTC
(examples include the SNMP
provisioning tab, the General>
Network provisioning tab, the Security
> Configuration provisioning tab, etc.).
Choose an object of the specified type
to delete.
There is an error deleting the item.