Failtosw (Trunk) - Cisco NCS 2000 series Troubleshooting Manual

Clear the FAILTOSW (2R, EQPT, ESCON, FC, GE, ISC, OCN/STMN, TRUNK, OTS) Condition
Clear the FAILTOSW (2R, EQPT, ESCON, FC, GE, ISC, OCN/STMN, TRUNK, OTS)
Condition
SUMMARY STEPS
1. Look up and troubleshoot the higher-priority alarm. Clearing the higher-priority condition frees the card
and clears the FAILTOSW.
2. If the condition does not clear, replace the working card that is reporting the higher-priority alarm by
following the
the protect facility and not reporting FAILTOSW.
DETAILED STEPS
Step 1
Look up and troubleshoot the higher-priority alarm. Clearing the higher-priority condition frees the card and clears the
FAILTOSW.
Step 2
If the condition does not clear, replace the working card that is reporting the higher-priority alarm by following the
Physically Replace a Card, on page 453
reporting FAILTOSW.
Replacing the working card that is reporting the higher-priority alarm allows traffic to revert to the working slot and the
card reporting the FAILTOSW to switch to the protect card.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).

FAILTOSW (TRUNK)

Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The Failure to Switch to Protection Facility condition applies to MXP and TXP trunk ports in splitter protection
groups and occurs when a working or protect trunk port switches to its companion port by using a MANUAL
command.
Note
For more information about protection schemes, refer to the
Clear the FAILTOSW (TRUNK) Condition
SUMMARY STEPS
1. Look up and troubleshoot the higher-priority alarm. Clearing the higher-priority condition frees the card
and clears the FAILTOSW.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
190
Physically Replace a Card, on page 453
procedure. This card is the working facility using the protect facility and not
procedure. This card is the working facility using
http://www.cisco.com/c/en/us/support/index.html
Manage the Node document.
Alarm Troubleshooting