Transient Conditions - Cisco NCS 2000 series Troubleshooting Manual

Transient Conditions

Transient Conditions
This section lists in alphabetical order all the transient conditions encountered in Software Release 9.1. The
description, entity, SNMP number, and SNMP trap accompany each condition.
ADMIN-DISABLE
The Disable Inactive User (ADMIN-DISABLE) condition occurs when the administrator disables a user or
when a account is inactive for a specified period.
This transient condition does not result in a standing condition.
ADMIN-DISABLE-CLR
The Disable Inactive Clear (ADMIN-DISABLE-CLR) condition occurs when the administrator clears the
disable flag on a user account.
This transient condition does not result in a standing condition.
ADMIN-LOCKOUT
The Admin Lockout of User (ADMIN-LOCKOUT) condition occurs when the administrator locks a user
account.
This transient condition does not result in a standing condition.
ADMIN-LOCKOUT-CLR
The Admin Lockout Clear (ADMIN-LOCKOUT-CLR) condition occurs when the administrator unlocks a
user account or when the lockout time expires.
This transient condition does not result in a standing condition.
ADMIN-LOGOUT
The Admin Logout of User (ADMIN-LOGOUT) condition occurs when the administrator logs off a user
session.
This transient condition does not result in a standing condition.
ADMIN-SUSPEND
The Suspend User (ADMIN-SUSPEND) condition occurs when the password for a user account expires.
This transient condition does not result in a standing condition.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
Transient Conditions
469