Cisco NCS 2000 series Troubleshooting Manual page 568

Error Messages Reference
Error/Warning
ID
WID-5025
EID-5026
WID-5027
WID-5028
EID-5029
EID-5030
WID-5031
EID-5032
EID-5033
EID-5034
EID-5035
EID-5036
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
522
Error/Warning Message
The path targeted for this switch request is already
active. The switch request can be applied, but traffic
will not switch at this time.
An ONS 15600 cannot serve as the primary or
secondary node in a four-fiber {0} circuit. Please
change your ring and/or node selections so that an ONS
15600 is not chosen as the primary or secondary node
in this four-fiber {1} circuit.
The {0} Edit dialog box for the ring {1} has been closed
due to significant provisioning changes. These changes
might only be transitory, so you can reopen the {0}
Edit dialog box to view the updated state.
Warning: This operation should only be used to clean
up rolls that are stuck. It might also affect completeness
of the circuit. Is it OK to continue with the deletion?
A software downgrade cannot be performed to the
selected version while an SSXC card is inserted in this
shelf. Please follow the steps to replace the SSXC with
a CXC card before continuing the software downgrade.
A software downgrade cannot be performed at the
present time.
Canceling a software upgrade during a standby TSC
clock acquisition might result in a traffic outage.
An error occurred while accepting the load.
The profile could not be loaded. An error occurred
while decoding the characters.
The profile could not be loaded.
An error occurred while trying to recognize the file
format.
The profile could not be loaded. An error occurred
while reading the file.
The GNE hostname {0} is invalid.
Error Messages
Description
Refer to the warning message text.
Refer to the error message text.
Re-open the BLSR/MS-SPRing edit
window to view the updated state of
the ring.
Refer to the warning message text.
Refer to the error message text.
Try the software downgrade later.
Refer to the warning message text.
Refer to the error message text.
CTC detected an error while decoding
characters and could not load the
profile.
CTC detected an error and could not
load the profile.
CTC could not read the file and is
therefore unable to load the profile.
The specified host name is invalid.
CTC could not resolve the host name
to any valid IP address