Cisco NCS 2000 series Troubleshooting Manual page 596

Error Messages Reference
Error/Warning
ID
WID-6340
WID-6341
WID-6342
WID-6343
EID-6344
EID-6345
EID-6346
EID-6347
EID-6348
EID-6349
EID-6350
EID-6351
EID-6352
EID-6353
EID-6354
EID-6355
EID-6356
EID-6357
EID-6358
EID-6359
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
550
Error/Warning Message
One or more QinQ rules have not been deleted because
they are not related to the current circuit.
The Functional view on {0} is disabled.
Changing the {0} settings might be traffic affecting.
Do you want to continue?
The selected file name is too long. File names
(including the full path) must be less than 254
characters.Please enter a valid file name.
It is detected a shelf mismatch condition.
The line termination is invalid.
The overhead is not supported.
A patchcord was expected for a successful operation.
A Virtual link already exists on the same path.
The overhead creation has failed.
The unprotected line is not present
The port status is active.
IPv4 access cannot be disabled when IPv6 mode is not
enabled on the node.
IPv4 access cannot be disabled when the node is in
Multishelf configuration.
Disabling IPv4 access may lead to loss of
communication with the node. Make the change
anyway?
IPv6 access cannot b disabled when IPv4 Access is
disabled on the node.
Multishelf configuration cannot be enabled when IPv4
Access is disabled on the node.
The Multicast SVLAN field can be modified only when
the MVR feature is disabled.
Too many TRANSLATE QinQ rules per port with
MVR feature enabled.
The PLIM {0} is part of an OCH Trail circuit and its
configuration cannot be changed.
Error Messages
Description
Refer to the warning message text.
Refer to the warning message text.
Refer to the warning message text.
Refer to the warning message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.