Trunk-Payload-Mism - Cisco NCS 2000 series Troubleshooting Manual

Alarm Troubleshooting
DETAILED STEPS
Clear the remote client signal on the node.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).

TRUNK-PAYLOAD-MISM

Default Severity: Major (MJ), Service-Affecting (SA)
Logical Object: OCN, OTN, GE, FC
The TRUNK-PAYLOAD-MISM alarm is raised on the 10x10G-LC card, which is configured in the 10x10G
muxponder mode. This occurs when the payload types configured at the near-end and far-end nodes are
different.
Clear the TRUNK-PAYLOAD-MISM Alarm
Configure the same payload type at both near-end and far-end nodes.
SUMMARY STEPS
1. Log in to a node on the network.
2. In node view (single-shelf mode) or shelf view (multishelf mode), double-click the reporting card in CTC
to open the card view.
3. Click the Provisioning > Pluggable Port Modules tabs.
4. In the Pluggable Port Modules area, click Create.
5. Choose the same payload type from the Port Type drop-down list and click OK.
DETAILED STEPS
Step 1 Log in to a node on the network.
Step 2
In node view (single-shelf mode) or shelf view (multishelf mode), double-click the reporting card in CTC to open the
card view.
Step 3
Click the Provisioning > Pluggable Port Modules tabs.
Step 4 In the Pluggable Port Modules area, click Create.
Step 5
Choose the same payload type from the Port Type drop-down list and click OK.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
http://www.cisco.com/c/en/us/support/index.html
http://www.cisco.com/c/en/us/support/index.html
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
TRUNK-PAYLOAD-MISM
421