Cisco NCS 2000 series Troubleshooting Manual page 573

Error Messages
Error/Warning
ID
EID-5100
EID-5101
EID-5102
EID-5103
EID-5104
EID-5105
EID-5106
EID-5107
EID-5108
EID-5109
EID-5110
EID-5111
EID-5112
EID-5113
EID-5114
EID-5115
EID-5116
EID-5117
EID-5118
EID-5119
EID-5120
EID-5122
EID-5123
Error/Warning Message
Raman Command in TimeOut. {0}.
Failed to get trunk ports for client. {0}.
Protected cards must have 2 trunk ports. (found {0}).
Failed to get colocated OCH ports for trunk: {0}.
Both OCHCC and OCHNC Protected are not allowed.
Cannot find entity model for endpoint: {0}.
Cannot find Out OTS line for selected endpoint: {0}.
Cannot find Protected Out OTS line for selected
endpoint: {0}.
The demultiplexer associated with the selected endpoint
:{0} is missing or not connected.
The demultiplexer associated with the protect path for
the selected endpoint: {0} is missing or not connected.
The card selection is invalid. No cards were selected.
An error was occurred while configuring SNMPv3
proxy server.
No source of trap was selected.
Specify a valid value for target tag.
Specify a valid value for context engine ID.
No value was selected for proxy type.
No value was selected for local user.
No value was selected for proxy destination.
Specify a valid value for target IP.
The password for authentication should be at least 8
characters long.
The user name should be atleast 6 characters long.
The node ( {0} ) does not support ML-MR POS port
protection.
Primary ( {0} ) and secondary ( {1} ) nodes have to be
the same for ML-MR POS port protection.
Description
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
Error Messages Reference
527