Cisco NCS 2000 series Troubleshooting Manual page 545

Error Messages
Error/Warning
ID
EID-3050
EID-3051
EID-3053
EID-3054
EID-3055
EID-3056
EID-3057
EID-3058
EID-3059
EID-3060
EID-3061
EID-3062
EID-3064
EID-3065
EID-3066
EID-3067
EID-3068
Error/Warning Message
An error occurred while trying to save the file to your
local file system.
The configuration file has a maximum size of {0} bytes.
The value of {0} must be between {1} and {2}.
The provisioned input/output ports cannot be removed
or another user is updating the card. Please try to
remove these ports later.
The soak maintenance pane cannot be created.
Defaults cannot be saved to the file {0}.
Default properties cannot be loaded from the node.
The file {0} does not exist.
An error occurred while refreshing.
The ALS recovery pulse interval must be between {0}
seconds and {1} seconds.
The ALS recovery pulse duration must be between {0}
seconds and {1} seconds.
An error occurred while setting values in the table.
This is not a G1000 card.
An error occurred while attempting to create this
RMON threshold: {0}
The sample period must be between 10 and {0}.
The rising threshold must be between 1 and {0}.
The falling threshold must be between 1 and {0}.
Description
Check whether the file already exists
and cannot be over written, or there is
a space constraint in the file system.
The size of the configuration file
should not exceed the specified
number of bytes.
The value of the item must be between
the specified values.
Another user may be updating the
card. You can try again later.
Refer to the error message text.
CTC cannot save the defaults to the
specified file.
Refer to the error message text.
Refer to the error message text.
There was an error while refreshing.
The automatic laser shutdown (ALS)
Recovery Interval must be between
the specified range of seconds.
The automatic laser shutdown (ALS)
Recovery Duration must be between
the specified range of seconds.
Refer to the error message text.
This card is not a G1000-4 card.
You must wait some time before you
try again.
Refer to the error message text.
This is an invalid rising threshold
entry. The valid range is from 1 to the
specified value.
This is an invalid falling threshold
entry. The valid range is from 1 to the
specified value.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
Error Messages Reference
499