Clear The Local-Sudi-Cert-Verification-Failed Alarm - Cisco NCS 2000 series Troubleshooting Manual

Alarm Troubleshooting

Clear the LOCAL-SUDI-CERT-VERIFICATION-FAILED Alarm

This alarm is cleared when the verification of an active SUDI certificate passes.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
LOCAL-CERT-EXPIRED
Default Severity: Major (MJ), Non-Service-Affecting (NSA)
Logical Object: EQPT
The Local Certificate Expired alarm is raised when the validity of an active certificate chain expires.
Clear the LOCAL-CERT-EXPIRED Alarm
Procure and install a the local active certificate chain.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
LOCAL-FAULT
Default Severity: Major (MJ), Service-Affecting (SA)
Logical Objects: ETH
The LOCAL-FAULT alarm is raised on the GE_XP, GE_XPE, 10GE_XP, and 10GE_XPE card ports
provisioned in 10 GE LAN PHY mode under the following conditions:
• when there is a loss of signal on the port.
• when a local fault character sequence is received in the incoming MAC stream as defined in IEEE 802.3ae,
The LOCAL-FAULT alarm is raised on the 40G-MXP-C, 40E-MXP-C, and 40ME-MXP-C card client ports
provisioned with 10 GE or 10 GE FC payloads when a local fault character sequence is received in the incoming
MAC stream as defined in IEEE 802.3ae, 10 Gigabit Ethernet fault signaling scheme.
10 GE fault signaling scheme.
Clear the LOCAL-SUDI-CERT-VERIFICATION-FAILED Alarm
http://www.cisco.com/c/en/us/support/index.html
http://www.cisco.com/c/en/us/support/index.html
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
261