Cisco NCS 2000 series Troubleshooting Manual page 4

Contents
Create a Facility Loopback on an Intermediate-Node MXP or TXP Port
Create a Terminal Loopback on Intermediate-Node MXP or TXP Ports
Perform a Facility Loopback on a Destination-Node MXP, TXP, XP, or ADM-10G Port
Perform a Terminal Loopback on a Destination-Node MXP, TXP, XP, or ADM-10G Port
Troubleshooting DWDM Circuit Paths With ITU-T G.709 Monitoring
ITU-T G.709 Monitoring in Optical Transport Networks
Optical Channel Layer
Optical Multiplex Section Layer
Optical Transmission Section Layer
Performance Monitoring Counters and Threshold Crossing Alerts
Forward Error Correction
Sample Trouble Resolutions
Using CTC Diagnostics
Card LED Lamp Tests
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
iv
Create the Terminal Loopback on a Source-Node MXP, TXP, XP, or ADM-10G Port
Test and Clear the MXP, TXP, XP, or ADM-10G Port Terminal Loopback Circuit
Test the MXP, TXP, XP, or ADM-10G Card
Create a Facility Loopback on an Intermediate-Node MXP or TXP Port
Test and Clear the MXP or TXP Port Facility Loopback Circuit
Test the MXP or TXP Card
Create a Terminal Loopback on Intermediate-Node MXP or TXP Ports
Test and Clear the MXP or TXP Terminal Loopback Circuit
Test the MXP or TXP Card
Create the Facility Loopback on a Destination-Node MXP, TXP, XP, or ADM-10G Port
Test and Clear the MXP, TXP, XP, or ADM-10G Facility Loopback Circuit
Test the MXP, TXP, XP, or ADM-10G Card
Create the Terminal Loopback on a Destination-Node MXP, TXP, XP, or ADM-10G Port
Test and Clear the MXP, TXP, XP, or ADM-10G Terminal Loopback Circuit
Test the MXP, TXP, XP, or ADM-10G Card
28
Set Node Default BBE or SES Card Thresholds
Provision Individual Card BBE or SES Thresholds in CTC
Provision Card PM Thresholds Using TL1
Provision Optical TCA Thresholds
32
Provision Card FEC Thresholds
33
34
14
17
20
23
26
28
28
29
30
31
32
32
14
15
16
17
18
19
20
23
26
27
27
29
30
13
21
22
24
25