Safety Precaution For Energy Hazard; Safety Precaution For Laser Radiation - Cisco NCS 1004 Series Quick Start Manual

Hide thumbs Also See for NCS 1004 Series:

Safety Precaution for Energy Hazard

Warning

Never defeat the ground conductor or operate the equipment in the absence of a suitably installed

ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are

uncertain that suitable grounding is available. Statement 1024

Warning

Use copper conductors only. Statement 1025

Warning

This product requires short-circuit (overcurrent) protection, to be provided as part of the building

installation. Install only in accordance with national and local wiring regulations. Statement 1045

Safety Precaution for Energy Hazard

Warning

Do not reach into a vacant slot when installing or removing a module. Exposed circuitry is an energy

hazard.Statement 206

The Cisco NCS 1004 can be configured for a DC power source. Do not touch terminals with body parts or

conductive objects while they are energized.

Cisco NCS 1004 is classified as Hazard Level 1M as per IEC 60825-2 and Laser Class 1/1M as per IEC

60825-1, since it may include Class 1 or Class 1M Laser sources.

Figure 1: Class 1M Laser Product Label

Safety Guidelines

Table of Contents