Auth-Ec - Cisco NCS 2000 series Troubleshooting Manual

Alarm Troubleshooting
Step 4
If you have not been using a test set, or if the test set is correctly set up, the error is in the provisioned CTC circuit size.
Complete the Delete a Circuit, on page 454
Step 5 Recreate the circuit for the correct size.
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html
en/us/support/web/tsd-cisco-worldwide-contacts.html
your country.

AUTH-EC

Default Severity: Major (MJ), Non-Service-Affecting (NSA)
Logical Objects: OTU
The Authentication Error Count (AUTH-EC) alarm is raised when the authentication error count crosses the
authentication threshold.
Clear the AUTH-EC Alarm
SUMMARY STEPS
1. This alarm is cleared automatically when the authentication error count becomes less then authentication
error threshold.
DETAILED STEPS
This alarm is cleared automatically when the authentication error count becomes less then authentication error threshold.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
AUTO-SENSE
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: PPM
The AUTO-SENSE alarm is raised when the port detects an incoming signal on the port. The alarm clears
automatically after detecting the signal.
procedure.
for more information or log into
to obtain a directory of toll-free Technical Support numbers for
http://www.cisco.com/c/en/us/support/index.html
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
AUTH-EC
http://www.cisco.com/c/
131