Faps - Cisco NCS 2000 series Troubleshooting Manual

FAPS

FAPS
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: TRUNK
The Fast Automatic Protection Switching condition is applicable to GEXP/10GEXP cards. This condition
occurs when the protection port, on the master card, switches from blocking to forwarding state.
Clear the FAPS Alarm
SUMMARY STEPS
1. When the cause of switching disappears, the protection port switches from the forwarding to the blocking
state, and the FAPS alarm clears.
DETAILED STEPS
When the cause of switching disappears, the protection port switches from the forwarding to the blocking state, and the
FAPS alarm clears.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
FAPS-CONFIG-MISMATCH
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: EQPT
The Fast Automatic Protection Switching (FAPS) Config Mismatch condition is raised when a GE-XP or
10GE-XP card that is provisioned as a master card in a FAPS ring, resets or when one of the master card's
trunk port is not set to Blocking.
Clear the FAPS-CONFIG-MISMATCH Condition
SUMMARY STEPS
1. Check the configuration of the master card. Ensure that at least one of the trunk ports of the master card
is in the blocking state and the FAPS ring is complete.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
194
http://www.cisco.com/c/en/us/support/index.html
Alarm Troubleshooting