Connecting To A Conference Directly Or Via Entry Queue - Polycom RealPresence 4000 Installation And Configuration Manual

The default Entry Queues and Meeting Rooms can be customized or
additional conferencing entities can be added according to your
organization's requirements. For more details on various conferencing
entities, see the RealPresence Collaboration Server (RMX) 1500/2000/4000
Administrator's Guide.
To start ongoing conferences and monitor their status see the
RealPresence Collaboration Server (RMX) 1500/2000/4000 Getting Started
Guide, Chapter 3 "Basic Operation".
Connecting to a Conference Directly or via Entry
Queue
The RMX is shipped with pre-configured default CP (AVC-based)
conferencing entities that can be used to dial in and start conferences.
Default (Transit) Entry Queue ID: 1000, default Meeting Room IDs:
1001, 1002, 1003, and 1004.
H.323 Participants
H.323 participants dial:
[MCU Prefix in Gatekeeper][Conference or Entry Queue ID/Name].
For example, if the MCU prefix in gatekeeper is 925, you can dial in to
the default Entry Queue by entering 925 or 9251000 and be routed to
Meeting Rooms by entering its ID (i.e. 1001, 1002, 1003 or 1004).
You can connect directly to one of the default Meeting Rooms by dialing
its number, for example, 9251001.
Alternatively, you can use the Entry Queue or conference name to
connect directly to the conference. For example, if the conference name
is Maple_Room, the participant can dial 925Maple_Room.
SIP Participants
The dialing string is composed of the conference routing name as
registered with the SIP server and domain name in the following
format: conference_name@domain_name.
For example, if the conference name is Maple_Room, the participant
dials Maple_Room@polycom.com.
19