Setting The Port Usage Threshold; Sip Dial-In Busy Notification - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide

Setting the Port Usage Threshold

To Set the Port Usage Threshold:
1 In the Setup menu, click Port Gauge to open the Port Gauge dialog box.
2 Enter the value for the percentage capacity usage threshold.
The high Port Usage threshold represents a percentage of the total number of video available. It is
set to indicate when resource usage is approaching its maximum, resulting in no free resources to
run additional conferences. When port usage reaches or exceeds the threshold, the red area of the
gauge flashes. The default port usage threshold is 80%.
3 Click OK.

SIP Dial-in Busy Notification

When the system flag SEND_SIP_BUSY_UPON_RESOURCE_THRESHOLD is set to YES (NO is the
default), it enables the MCU to send a busy notification to a SIP audio endpoint or a SIP device when dialing
in to the MCU whose audio resource usage exceeded the Port Usage threshold.
The Collaboration Server will send a SIP busy response to SIP audio endpoints when:
● The system flag SEND_SIP_BUSY_UPON_RESOURCE_THRESHOLD is set to YES (NO is the
default)
● The port usage threshold for Audio resources is exceeded. The threshold is defined in the Setup >
Port Gauge dialog box.
Polycom®, Inc. 537