Setting The Port Usage Threshold; Sip Dial-In Busy Notification - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s Administrator's Guide

Setting the Port Usage Threshold

To Set the Port Usage Threshold:
1
2

SIP Dial-in Busy Notification

When the system flag SEND_SIP_BUSY_UPON_RESOURCE_THRESHOLD is set to YES
(NO is the default), it enables the MCU to send a busy notification to a SIP audio endpoint
or a SIP device when dialing in to the MCU whose audio resource usage exceeded the Port
Usage threshold.
The Collaboration Server will send a SIP busy response to SIP audio endpoints when:
•
•
20-12
In the Setup menu, click Port Gauge to open the Port Gauge dialog box.
Status Bar
Enter the value for the percentage capacity usage threshold.
The high Port Usage threshold represents a percentage of the total number of video
available. It is set to indicate when resource usage is approaching its maximum,
resulting in no free resources to run additional conferences. When port usage reaches or
exceeds the threshold, the red area of the gauge flashes. The default port usage
threshold is 80%.
Click OK.
The system flag SEND_SIP_BUSY_UPON_RESOURCE_THRESHOLD is set to YES
(NO is the default)
The port usage threshold for Audio resources is exceeded. The threshold is defined in
the Setup > Port Gauge dialog box.
Usage Threshold
Polycom, Inc.