System Basic Setup - NEC UNIVERGE SV8100 Manual

System Basic Setup (1)

System Basic Setup (1)
Installation
Installation
VoIP Board (IPLA) is installed onto CD-CP00 Blade. (One board per system)
When IPLA is installed, the system has two different Networks on CD-CP00 at the
same time. Recommend to use "CN1" (on IPLA) for all features (such as SMDR,
ACD-MIS, CTI, VoIP, etc) instead of "CN7".
CN1 (IPLA) Setup
• 10-12-09 : IPLA IP Address
(Default : 172.16.0.10)
• 10-12-10 : Subnet Mask
(Default : 255.255.0.0)
• 10-12-03 : Default Gateway
(Default : 0.0.0.0)
Even though the above configuration, "CN7" (on CD-CP00) is still working and can
be used for the data communication features and maintenance purpose.
• IP Address for IPLA and IP Address for CD
• IP Address for IPLA and IP Address for CD
• HOT Start ( System
• HOT Start ( System
© 2009 by NEC Taiwan
CN1
(IPLA)
Reset) is necessary in case the above PRG has been changed.
Reset) is necessary in case the above PRG has been changed.
CN7 CN7 (CP00) Setup
(CP00)
• 10-12-01 : CD-CP00 IP Address
• 10-12-02 : Subnet Mask
• 10-12-03 : Default Gateway
- CP00 can NOT be set as same segment.
- CP00 can NOT be set as same segment.
(Default : 192.168.0.10)
(Default : 255.255.255.0)
(Default : 0.0.0.0)