NEC UNIVERGE SV9100 Features And Specifications page 1138

SMDR Summary Report
OUTGOING CALL/COST SUMMARY
FOR DAY OF nn/nn/nn
TOTAL NO. OF OUTGOING PSTN CALLS: 0
TOTAL NO. OF OUTGOING ISDN CALLS: 0
NO. OF OUTGOING PSTN CALLS COSTED: 0 COST: 0
NO. OF OUTGOING ISDN CALLS COSTED: 0 COST: 0
OUTGOING CALL/COST
SUMMARY FOR WEEK ENDING nn/nn/nn
TOTAL NO. OF OUTGOING PSTN CALLS: 49
TOTAL NO. OF OUTGOING ISDN CALLS: 0
NO. OF OUTGOING PSTN CALLS COSTED: 0 COST: 0
NO. OF OUTGOING ISDN CALLS COSTED: 0 COST: 0
OUTGOING CALL/COST SUMMARY
FOR MONTH ENDING nn/nn/nn
TOTAL NO. OF OUTGOING PSTN CALLS: 49
TOTAL NO. OF OUTGOING ISDN CALLS: 0
NO. OF OUTGOING PSTN CALLS COSTED: 0 COST: 0
NO. OF OUTGOING ISDN CALLS COSTED: 0 COST: 0
Conditions
SMDR can record/print both system trunk and internal calls. The buffer stores calls when
the SMDR device is unavailable. When the buffer fills, SMDR will not collect any new calls
until the buffer is cleared.
The SV9100 can buffer up to 4000 calls.
When SMDR reports are enabled using the same port as the Traffic Reporting feature
(example: 147), the SMDR blocks the Traffic reports. Unplug the cable and plug it back in to
allow Traffic reports to print.
SMDR requires a connection to the GCD-CP10 LAN.
DT300 and DT700 style terminals do not support a RS232 serial connection for SMDR
output.
If no answer is received, NO ANSWER is displayed regardless of the system programing
for the Caller ID display option (Trunk only).
The setting in Program 35-02-18 works regardless of the entry in Program 35-02-15 or
35-02-17.
When Program 35-02-18 is set to 1, the first and second lines are sometimes separated.
When the buffer is full, the overflowed data may not be shown.
1138