System Caller Log - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

System Caller Log

With this feature, the user can check all caller logs one by one when they push the system caller log

function key. User can check 200 caller logs in the System. All outside calls whether answered or not

are stored in the System Call log.

The system caller log key is appearance function code. Set Program 20-07-10 to '1' in

order to set key via service code.

The latest log is shown first. The system call log is registered when a call ends. (The call log

list is not the order of incoming call time.)

The oldest log can be checked when the user presses the up soft-key or Volume UP Key.

Only trunk Calls are displayed.(Program 15-02-34 settings are not used.)

The Cursor key on DT7xx/DT8xx/DT3xx/DT4xx terminals can be used to control the scroll

One record in 'SYSTEM CALL HISTORY' function is registered relating to one external

incoming call.

If a notified calling number agrees in search of Common ABB (Program 13-04) area, the

name of ABB is registered into the 'SYSTEM CALL HISTORY' record. Telephone Book is

not applied.

Internal Caller Logs are not displayed in this feature.

Search and jump function are not supported.

The Caller Logs are erased when system is reset.

Only a user can operate the system caller log key.

The system caller log is not supported on the DSS console function key.

The called extension number is not displayed.

If Program 20-02-18 times out, the LCD display changes to IDLE automatically.

Missed calls are noted by an asterisk.

Default Settings

System Availability

All Station and Trunk Terminals