Selecting Marker Analysis Target Trace (Data/Memory); Procedure - Agilent Technologies E4991A Operation Manual

Selecting Marker Analysis Target Trace (Data/Memory)

When the memory trace is used according to the procedures of "Trace Comparison Using
Memory Trace" on page 116, it is necessary to select the memory trace as the target of
analysis by the marker (data trace is the preset setting).

Procedure

Step 1. Click inside the window of the trace to select it as the target trace for marker analysis (or
click the measurement parameter name area, e.g.
press ) and make the trace active.
Step 2. Right-click to open the shortcut menu and click
Step 3. Click the
Marker On
Button Display
Marker On
Marker On: [Data]
Marker On: [Memory]
Chapter 6
Selecting Marker Analysis Target Trace (Data/Memory)
2: θz [°]
Marker
button and select the marker analysis target trace.
Marker Analysis Target Trace
Data trace
Memory trace
Analysis of Measurement Results
in the case of overlay display) (or
(or press ).
139