Reference Trace Display - Agilent Technologies PSA Series User Manual

4.5.5 Reference Trace Display

Mode:
Key Path:
Factory Preset:
State Saved:
Dependencies and
Couplings:
Remote Command
Notes:
Chapter 4
Spectrum Analysis
Source, Normalize
Blank
Saved in instrument state.
Parameter is disabled if active mode is not Spectrum Analyzer
or a connection has not been established at the specified IP
address.
When the reference trace is set to View, trace normalization is
turned OFF, and Trace 3 (the reference trace) is placed into
View mode.
No SCPI. Front Panel only.
Source Key and Programming Commands
Normalize
61