4
Measurement Software
Additional Assets
Use the Asset Manager to add other assets to your system. The procedure
is essentially the same for any asset. We use a source as an example.
Adding an asset involves two steps, once the hardware connections have
been made:
• Configuring the asset
• Verifying the server hardware connections.
If you have not already connected the assets to the system, do so now. Be sure to power off
N O T E
the system before making all hardware connections other than GPIB. (For more information
on connecting assets, see Chapter 3, "System Interconnections.")
Configuring an Asset
1
E5500_asset_manager
23 Mar 04 rev 1
Figure 21 Navigate to Asset Manager
44
Using
Figure 21
as a guide, navigate to Asset Manager. For this
example we invoke the Asset Manager Wizard from the E5500 main
screen. This is the most common way to add assets.
E5505A Installation Guide