Creating A Mirroring Group - 3Com Baseline 2928 PWR Plus User Manual

Perform the tasks described in
Table 1-1 Local port mirroring configuration task list
Task
Create a local mirroring group
Configure the mirroring ports
Configure the monitor port

Creating a Mirroring Group

Select Device > Port Mirroring from the navigation tree and click Create to enter the page for creating
a mirroring group, as shown in
Figure 1-2 Create a mirroring group
Table 1-2 describes the configuration items of creating a mirroring group.
Table 1-1 to configure local port mirroring:
Required
Refer to section Creating a Mirroring Group
Required
Refer to section Configuring Ports for a Mirroring Group
details.
During configuration, you need to select the port type Mirror Port.
You can configure multiple mirroring ports for a mirroring group.
Required
Refer to section Configuring Ports for a Mirroring Group
details.
During configuration, you need to select the port type Monitor
Port. You can configure one only monitor port for a mirroring
group.
Figure 1-2.
1-2
Remarks
for details.
for
for