5-10
C
5: F
C
A
M
HAPTER
URTHER
ONFIGURATION
ND
ONITORING
Editing ARP Information
ARP Parameters
Select CONFIGURATION from the Main Menu. Select NETWORK
PROTOCOL from the Configuration menu. Select ARP from the
Network Protocol menu. Select PARAMETERS from the ARP
menu.
The ARP Parameters screen appears, as shown in
Figure
5-7. You
use this screen for configuring the way in which the bridge
manages the local ARP (Address Resolution Protocol) tables.
The bridge uses ARP to obtain from the network the physical
address that corresponds to a specific IP address. It stores the
learned IP/physical address pairs in ARP tables. This screen is
intended for use by Product Support Engineering personnel only.
Figure 5-7 ARP Parameters
DUA1860-0AAA01
Need help?
Do you have a question about the LinkBuilder MSH and is the answer not in the manual?