YASKAWA SGD7S-xxxDA0 series Product Manual page 635

Revision History
The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
MANUAL NO. SIEP S800001 80B <1>
Published in Japan October 2015
Date of Rev.
Publication No.
October 2017 <7>
January 2017 <6>
November 2016 <5>
June 2016 <4>
May 2016 <3>
March 2016 <2>
October 2015 <1>
June 2015
Revision History-1
Revision number
Date of publication
Section
Chapter 5 Addition: Information on dynamic brake
All chapters Partly revised.
Back cover Revision: Address
1.5.1, 1.6.1, 1.6.2, Addition: Information on SGD7S-210D to -370D
2.1.1, 2.1.2, 2.1.3,
2.2.1, 2.2.2, 2.3.1,
3.3, 3.4.2, 4.3.1,
4.3.2, 4.3.4, 5.12
4.4.3 Addition: Specifications for diodes to prevent reverse current flow
5.10.3, 6.13.2 Deletion: Torque from the parameter table for Pn406
6.14.2, 16.2 Addition: Parameter numbers related to object 2751h
Back cover Revision: Address
All chapters Partly revised.
2.1.1 Revision: Value of continuous output current (Model: SGD7S-170D)
1.5.1, 1.6.1, 1.6.2, Addition: Information on SGD7S-170D
2.1.1, 2.1.2, 2.3.2,
3.3, 3.4.2, 4.3.4,
5.12, 15.2.2
1.5.1, 2.1.2, 4.2, Addition: Information on Servomotor brake control
4.3.1, 4.4.4,
5.11.3, 5.11.5,
15.2.2, 16.1.2
All chapters Partly revised.
Preface Revision: Information on Servomotor UL standards and EU Directives
1.2.6 Revision: Information on torque user unit
1.5.1, 1.5.2 Revision: Information on interpreting SERVOPACK and Servomotor model numbers
1.7, 9.5 Addition: Information on alarm tracing
2.1.1 Revision: Information on control power supply
2.2 Addition: Connector numbers (CN101, CN102, CN115, and CN201)
3.4.2 Revision: Information on installing more than one SERVOPACK
4.3.3 Revision: Time for turning the power supply OFF and ON again (from 100 ms to 1 s)
4.5.2 Revision: Illustration of I/O signal connectors
5.14.4, 14.5 Revision: Setting range for torque reference units
11.1.1 Revision: Description of safety functions
14.2 Revision: Precaution on Store Parameters Field (1010h)
14.1, 16.2 Revision: Data types for 27C0h and 27C1h
16.1.2, 16.4 Deletion: Pn52D
16.4 Addition: Supplemental description of enable timing
All chapters Partly revised.
6.14 Addition: Information on ZONE outputs
Back cover Revision: Address
−
−
First edition
Revised Contents