Configuring Basic Sip Settings - Avaya Scopia XT Telepresence Deployment Manual

Configuring the XT Telepresence
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
Settings with the Quick Setup Wizard
2. Configure the gatekeeper connection as described in the following table.
Field
Use Gatekeeper
Mode or Automatic IP
Address
Gatekeeper address
E.164
3. If you are registering your endpoint to a SIP server, select Next and continue with

Configuring Basic SIP Settings

Setup Wizard.
For XT Executive only, to configure using your keyboard and mouse to navigate the menus,
continue with Deployment Guide for Avaya Scopia
Related links
Configuring Basic Settings with the Quick Setup Wizard
Configuring Basic SIP Settings
About this task
This section explains how to register your XT Series to the SIP server.
The XT Series can function in a SIP environment, where endpoint names or numbers are managed
by SIP servers, not gatekeepers. You can dial an endpoint by entering its name or number like 1234
or joe_smith, rather than remembering its IP address, where the SIP server routes the call correctly.
To do this, the SIP server must register all endpoints to maintain the mapping list of names/numbers
and endpoints to successfully route calls.
Before you begin
Access the quick setup wizard from the endpoint or web interface, as described in
Settings with the Quick Setup Wizard
Verify that you have the following information about your SIP environment:
• The DNS name or IP address of the SIP server. You can define up to three servers.
• For the SIP infrastructure that requires a SIP user authentication, credentials for authenticating
XT Series to the SIP server.
Procedure
1. Enter information for the SIP server, as described below.
January 2017
on page 51, and skip to this step.
Description
Choose whether this endpoint is registered to a gatekeeper, like
the H.323 Gatekeeper.
Choose whether the endpoint is configured to automatically
detect the gatekeeper. For more information, ask your network
administrator.
Enter the IP address or DNS name of the gatekeeper.
Enter the H.323 number required to dial the endpoint.
on page 58. Otherwise, select Done to complete the Quick
on page 51, and skip to this step.
®
Avaya Scopia XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Basic
®
XT Series.
on page 51
Configuring Basic
58