Test Connections - Keithley 4200-SCS Reference Manual

Model 4200-SCS Reference Manual
Figure 15-9
Model 4200-CVU-Prober-Kit

Test connections

Typical test connections to a DUT
NOTE
Figure 15-10
BNC bulkhead connectors. The cables and adapters are supplied with the 4210-CVU. Use a
conductive test fixture with the bulkhead connectors mounted directly to the test fixture. Do not use
insulators between the connectors and test fixture.
4200-901-01 Rev. S / May 2017
A
C D
B
E
G
F
The shields of the SMA cables must be connected together and extended as far as
possible to the device under test (DUT) (see
shows typical connections to a DUT installed in a test fixture equipped with female
Return to
Section 15: Multi-Frequency C-V measurements (4210-CVU)
H
Figure
Section Topics
15-1).
15-11