Example For Configuring Netstream Of Ipv4 Aggregation Traffic - Huawei S9700 Series Configuration Manual

S9700 Core Routing Switch
Configuration Guide - SPU
#
return
On the SPU:
#
sysname SPU
#
ip netstream export source 10.2.1.1
ip netstream export host 10.2.1.2 6000
ip netstream timeout inactive 100
ip netstream tcp-flag enable
#
interface XGigabitEthernet0/0/2.2
control-vid 101 dot1q-termination
dot1q termination vid 101
ip address 22.22.22.1 255.255.255.0
arp broadcast enable
#
ip route-static 10.2.1.0 255.255.255.0 XGigabitEthernet0/0/2.2 22.22.22.2
#
interface XGigabitEthernet0/0/1
ip netstream inbound
#
return
5.8.2 Example for Configuring NetStream of IPv4 Aggregation
Traffic
Networking Requirements
As shown in
on the traffic from the user network to different ISPs. The traffic statistics serve as the basis for
accounting.
Issue 01 (2012-03-15)
Figure 5-3, the NetStream function is configured on Switch B to collect statistics
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NetStream Configuration
170