Management Vlan Configuration; Prerequisites; Configuring The Management Vlan - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Management VLAN
Quidway S3100 Series Ethernet Switches

1.2 Management VLAN Configuration

1.2.1 Prerequisites

Before configuring the management VLAN, make sure the VLAN operating as the
management VLAN exists. If VLAN 1 (the default VLAN) is the management VLAN, just
go ahead.

1.2.2 Configuring the Management VLAN

Table 1-1 Configure the management VLAN
Operation
Enter system view
Configure
specified VLAN to
be
management
VLAN
Create
management
VLAN
and enter VLAN
interface view
Assign
address
management
VLAN interface
Provide
description
for
management
VLAN interface
Add a default route
Command
system-view
a
the management-vlan vlan-id
the
interface
interface
vlan-id
an IP
ip address { ip-address
to the
net-mask | bootp-alloc |
dhcp-alloc }
a
string
the description string
ip route-static
0.0.0.0
interface-number
gateway-address
[ preference value ]
Huawei Technologies Proprietary
Chapter 1 Management VLAN Configuration
—
Required
By default, VLAN 1 operates
as the management VLAN.
vlan-interface
Required
Required
By default, the management
VLAN interface has no IP
address.
Optional
By default, the description
string of the management
VLAN
"Vlan-interface
Interface".
0.0.0.0
{ interface-type
| Required
}
1-2
Remark
interface is
vlan-id