Optional) Configuring A Static User Binding Entry; Enabling Ip Source Guard - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Security
No.
1
2
3

4.3.2 (Optional) Configuring a Static User Binding Entry

Context
Before forwarding the data of the users who assigned IP addresses statically, the S2700 cannot
automatically learn the MAC addresses of the users or generate binding table entries for these
users. You need to create the binding table manually.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-bind static { { ip-address ip-address | ipv6-address ipv6-address } | mac-
address mac-address }
id [ ce-vlan ce-vlan-id ] ]
A static user binding entry is configured.
----End

4.3.3 Enabling IP Source Guard

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
This is a user-side interface.
Issue 01 (2011-07-15)
*
[ interface interface-type interface-number ] [ vlan vlan-
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Source IP Attack Defense Configuration
Data
(Optional) User information in a static
binding entry, including the IPv4 or IPv6
address, MAC address, VLAN ID, and
interface number of the user
Type and number of the interface enabled
with the IP source guard function
The alarm threshold for checking the received
IP packets.
123