Figure 2-3 Typical Networking Of Outputting Information To The Console - Huawei S9300 Configuration Manual

Table of Contents

Advertisement

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
At the same time, the network administrator doubts whether the FTP server module on the
S9300 is faulty, and needs to debug the FTP server module and view debugging information,
log information, and trap information on the FTP server module. If the network administrator
logs in to the S9300 through the console interface, debugging information, log information, and
trap information needs to be output from the FTP server module to the console interface. To
avoid interference, you must prohibit other modules from sending debugging information, log
information, and trap information to the console terminal.

Figure 2-3 Typical networking of outputting information to the console

PC
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
Context
To complete the configuration, you need the following data:
l
l
Context
Issue 02 (2009-08-06)
S9300
Console
Enable the information center.
Configure the information channel to the log host. Make sure that debugging information,
log information, and trap information about the QoS module is correctly sent to the log
host. At the same time, prohibit other modules from sending debugging information, log
information, and trap information to the log host.
Configure the channel to the console terminal. Make sure that debugging information, log
information, and trap information about the FTP server module is correctly sent to the
console terminal. At the same time, prohibit other modules from sending debugging
information, log information, and trap information to the console terminal.
Enable the debugging information about the FTP server module.
Enable the console to display information.
Configure the log host.
IP address of Eth 0/0/0 on the S9300 (Here, the IP address is 2.0.0.1/8.)
IP address of the log host (Here, the IP address is 1.0.0.2/8.)
NOTE
In the example, only the commands related to monitoring and debugging are listed. For details on
configuring the log host, see the help files on the log host.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Network
Eth0/0/0
2.0.0.1/8
2 Information Center Configuration
Log server
1.0.0.2/8
2-17

Advertisement

Table of Contents
loading

Table of Contents