Optional) Configuring A Static Router Interface; Optional) Configuring Multicast Group Member Interfaces - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast

2.3.3 (Optional) Configuring a Static Router Interface

Context
To control the multicast packets received by hosts, you can disable dynamic learning on
interfaces. After the dynamic learning function is disabled on interfaces, you can only configure
the static router interface and forwarding entries manually.
After dynamic learning of router interfaces is disabled in a VLAN, interfaces in the VLAN do
not listen on IGMP Query messages. In this case, you need to configure a static router interface
manually.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
undo igmp-snooping router-learning
Dynamic learning of router interfaces is disabled in the VLAN.
By default, a router interface can be dynamically learned.
Step 4 Run:
quit
The system view is displayed.
Step 5 Run:
interface interface-type interface-number
The interface view is displayed.
The interface can be an Ethernet interface, a GE interface, or an Eth-Trunk interface. It is the
interface that connects the S3700 to the upstream router.
Step 6 Run:
igmp-snooping static-router-port vlan { { vlan-id [ to vlan-id ] } &<1-10> }
The interface is configured as a static router interface.
----End

2.3.4 (Optional) Configuring Multicast Group Member Interfaces

Context
Multicast group member interfaces are responsible for receive multicast data sent for multicast
groups or source-specific multicast groups. By default multicast group members interfaces are
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 IGMP Snooping Configuration
12