Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 1915

Operation error
• When (s1) and (s2) are of INT data type
Error code Description
(SD0)
3400H The value (divisor) input to (s2) is 0.
• When (s1) and (s2) are of DINT data type
Error code Description
(SD0)
3400H The value (divisor) input to (s2) is 0.
• When (s1) and (s2) are of REAL data type
Error code Description
(SD0)
3400H The value (divisor) input to (s2) is 0.
The value input to (s1) is -0, a subnormal number, NaN (not a number), or .
3402H
The value input to (s2) is -0, a subnormal number, NaN (not a number), or .
3403H The data output from (d) exceeds the following range. (An overflow has occurred.)
128
|(d)|<2
• When (s1) and (s2) are of LREAL data type
Error code Description
(SD0)
3400H The value (divisor) input to (s2) is 0.
The value input to (s1) is -0, a subnormal number, NaN (not a number), or .
3402H
The value input to (s2) is -0, a subnormal number, NaN (not a number), or .
3403H The data output from (d) exceeds the following range. (An overflow has occurred.)
1024
|(d)|<2
27 ARITHMETIC OPERATION FUNCTIONS
27.4 Division
27
1913