Source-Ip; Udp-Port; Hierarchy Level [Edit Protocols Sflow]; Release Information - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

source-ip

Syntax
Hierarchy Level

Release Information

Description
Required Privilege
Level
Related
Documentation

udp-port

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
74
source-ip ip4/ipv6-address;
[edit protocols sflow]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure the IP address to be used for the sFlow datagrams. By configuring an IP address,
you ensure that the IP address is not dynamic. You can specify an IPv4 or IPv6 address.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 26
udp-port port-number;
[edit protocols sflow collector]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure the UDP port for a remote collector for sFlow network traffic monitoring. The
switch sends sFlow UDP datagrams to the collector for analysis.
port-number —UDP port number for this collector.
Default: 6343
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 27
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 26
Copyright © 2016, Juniper Networks, Inc.