Connecting The T320 To External Devices; Overview Of Connecting The T320 Router To External Devices - Juniper Core Router T Series Hardware Manual

CHAPTER 20

Connecting the T320 to External Devices

Overview of Connecting the T320 Router to External Devices

Copyright © 2018, Juniper Networks, Inc.
Overview of Connecting the T320 Router to External Devices on page 153
Tools and Parts Required to Connect the T320 Router to External Devices on page 154
Connecting PIC Cables to the T320 Router on page 154
Connecting the T320 Router to an External Alarm-Reporting Device on page 155
Connecting the T320 Router to a Management Console or Auxiliary Device on page 157
Connecting the T320 Router to a Network for Out-of-Band Management on page 159
After you have grounded the T320 Core Router, you can connect the following external
devices:
An external console or auxiliary device to the
Panel (CIP).
See "Connecting the T320 Router to a Management Console or Auxiliary Device" on
page 157.
A laptop, modem, or other auxiliary device to the
Interface Panel (CIP).
See "Connecting the T320 Router to a Management Console or Auxiliary Device" on
page 157.
A management network to the
(CIP).
See "Connecting the T320 Router to a Network for Out-of-Band Management" on
page 159.
An external alarm-reporting device to the alarm relay contacts on the CIP.
See "Connecting the T320 Router to an External Alarm-Reporting Device" on page
A network connection to the ports on the PICs.
See "Connecting PIC Cables to the T320 Router" on page
ports on the Connector Interface
CONSOLE
AUXILIARY
ETHERNET ports on the Connector Interface Panel
ports on the Connector
155.
154.
153