Connecting The Acx500 To Ground; Connecting The Acx500 Router To Earth Ground - Juniper ACX500 Hardware Manual

CHAPTER 13

Connecting the ACX500 to Ground

Connecting the ACX500 Router to Earth Ground

Copyright © 2016, Juniper Networks, Inc.
Connecting the ACX500 Router to Earth Ground on page 135
You must ground both the AC-powered and the DC-powered routers before connecting
them to power. Failing to ground the router properly might result in shock hazard.
To ground the router, you need the following tools:
Phillips (+) screwdriver, number 2
Electrostatic discharge (ESD) grounding wrist strap
Two 0.5-in. long stainless steel SS 316 SAE 10-32 screws, and flat washers (not
provided)
Grounding lug, Panduit LCD6-10A-L or equivalent for the ACX500 indoor router, and
Panduit LCCF6-14A-L for the ACX500 outdoor router (not provided)
Grounding cable, minimum 6 AWG (13.3 mm
and outdoor routers (not provided)
Corrosion-preventing compound for the ACX500 outdoor router, such as NO-OX-ID
(not provided)
WARNING: The ACX500 outdoor router has a provision for connecting a
two-hole grounding lug (Panduit LCCF6-14A-L). Ensure that the router is
permanently grounded with 6-AWG copper wire with this specified two-hole
lug.
Warnung Warnung Der Outdoor-Router ACX500 bietet die Möglichkeit, eine
Erdungsklemme mit zwei Öffnungen anzuschließen (Panduit LCCF6-14A-L).
Stellen Sie sicher, dass der Router ständig über ein 6-AWG-Kabel und die
entsprechende Klemme geerdet wird.
2
) 90° C wire for both the ACX500 indoor
135