Monitor Mode (Un ) - YASKAWA SGMJV User Manual

2.7
Monitor Mode (Un
The monitor mode can be used for monitoring the reference values, I/O signal status, and SERVOPACK inter-
nal status.
For details, refer to 8.2 Operation in Monitor Mode
The panel operator display numbers beginning with Un.
Display Example for Motor Speed
The example below shows how to display the contents of monitor number Un000.
Display after
Step
Operation
1
2
3
4
)
Keys
Press the MODE/SET Key to select the monitor mode.
MODE/SET DATA/
Press the UP or the DOWN Key to select Un000.
MODE/SET DATA/
Press the DATA/SHIFT Key for approximately one second
to display the data of Un000.
MODE/SET DATA/
Press the DATA/SHIFT Key for approximately one second
to return to the display of monitor number (step 1).
MODE/SET DATA/
2.7 Monitor Mode (Un
Description
)
2
2-11