Display after
Step
Operation
7
7.14 Software Version Display (Fn012)
Select Fn012 to check the SERVOPACK and encoder software version numbers.
Follow the steps below.
Display after
Step
Operation
1
2
3
4
5
Keys
Press the DATA/SHIFT Key for approximately one second.
"Fn011" is displayed again.
MODE/SET
DATA/
Keys
Press the MODE/SET Key to select the utility function
mode.
MODE/SET
DATA/
Press the UP or DOWN Key to select Fn012.
MODE/SET
DATA/
Press the DATA/SHIFT Key for approximately one second
to display the SERVOPACK software version number.
MODE/SET
DATA/
Press the MODE/SET Key to display the encoder software
version number.
MODE/SET
DATA/
Press the DATA/SHIFT Key for approximately one second.
"Fn012" is displayed again.
MODE/SET
DATA/
7.14 Software Version Display (Fn012)
Operation
Operation
7
7-23