Display after
Step
Operation
4
5
6
7
8
7.8 Offset Adjustment of Analog Monitor Output (Fn00C)
Keys
Press the MODE/SET Key to select channel 1 (analog mon-
itor 1) or channel 2 (analog monitor 2) monitor output.
MODE/SET
DATA/
Press the DATA/SHIFT Key for less than one second. Zero
adjustment data will be displayed as shown on the left.
MODE/SET
DATA/
Press the UP or DOWN Key to change the data.
MODE/SET
DATA/
Press the DATA/SHIFT Key for less than one second. The
analog monitor output channel is displayed as shown on the
left.
To adjust a different channel, switch the monitor channel
MODE/SET
DATA/
using steps 4 through 6.
Press the DATA/SHIFT Key for approximately one second.
"Fn00C" is displayed again.
MODE/SET
DATA/
Operation
7
7-15