YASKAWA SGMJV User Manual page 153

5 Operation
5.4.7 Reference Pulse Inhibit Function
To use the reference pulse inhibit function, set Pn000.1 to 1, 5, 7 or 8.
Pn000
Note: Reference pulse inhibit function is effective only with position control.
5-46
Parameter
n. 1
Position control (pulse train reference) /INHIBIT
Internal set speed control (contact ref-
⇔
n. 5 erence)
reference)
Position control (pulse train refer-
⇔
n. 7 ence) Speed control (analog refer-
ence)
Position control (pulse train refer-
⇔
n. 8 ence) Torque control (analog refer-
ence)
Control Method
Position control (pulse train /INHIBIT
/INHIBIT
/INHIBIT
Input Signal
When Enabled Classification
Used
After restart Setup