Chapter 2 Panel Operator; Panel Operator; Display Mode Selection - YASKAWA SGMJV User Manual

2 Panel Operator

2.1

Panel Operator

Panel operator consists of display part and keys.
Parameter setting, status display and execution of utility function are enabled using the panel operator.
The names and functions of the keys on the panel operator are as follows.
Note: To reset the servo alarm, press the UP Key and the
2.2

Display Mode Selection

Press the MODE/SET Key to select a display mode in the following order.
Return to
2-2
Display part
DOWN Key simultaneously. Be sure to remove the
cause and then reset the alarm.
Power ON
Press
MODE/SET
Press
MODE/SET
Press
MODE/SET
Press
MODE/SET
Key
No.
Keys
for one second.
Press
DATA/
DATA/SHIFT
Press for one second.
DATA/
DATA/SHIFT
Press for one second.
DATA/
DATA/SHIFT
Key Name Function
• To select a display mode.
MODE/SET
Key
• To set the set value.
UP Key To increase the set value.
DOWN Key To decrease the set value.
• To display the set value.
DATA/SHIFT
• To move to the next digit
Key
on the left when blinking.
Status Display Mode (Refer to 2.3)
Fn : Utility Function Mode
(Refer to 2.4)
(Refer to 2.4)
Pn : Parameter Setting Mode
(Refer to 2.6)
(Refer to 2.6)
Un : Monitor Mode
(Refer to 2.7)
(Refer to 2.7)
(Refer to 2.3)