General Safety Information; Movement And Stability Of The Unit - Sirona Cerec AC Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions for the Acquisition Unit CEREC AC
63 81 136 D3492
D3492.201.06.15.02 12.2015
4.1.3

General safety information

CAUTION
Do not damage the monitor
DO NOT touch the LCD screen with sharp or pointed objects.
If the LCD monitor is damaged (e.g. the glass screen is broken), prevent
any leaking liquid from coming into contact with your skin, mucous
membranes (eyes, mouth), or foodstuffs and be careful not to inhale any
escaping vapors.
Rinse any parts of your body or items of clothing already contaminated
by the liquid with ample amounts of water and soap.
CAUTION
Note on the prevention, recognition, and elimination of unintended
electromagnetic effects:
The CEREC AC acquisition unit is Class B equipment (classified
according to CISPR 11, EN 60601-1-2: 2007 based on IEC 60601-1-
2:2007 and A1:2004).
This system may be operated in a residential area provided that it is
used under the responsibility of a medical specialist.
NOTICE
Fragment CEREC AC Omnicam
Install only approved software
Đ tránh nhi u chương trình, ch có th cài đ t ph n m m đư c ch p
thu n.
➢ S d ng phiên b n ≥ CEREC software 4.0.4 hay
➢ S d ng phiên b n ≥ CEREC Connect software 4.1.1.
NOTICE
Khe thông gió không đư c che khu t.
4.1.4

Movement and stability of the unit

NOTICE
Fragment: CEREC AC
The unit can overturn or slip away
For reasons of tilt stability, the unit must be pulled by its front handle
when being moved. If you push the unit, obstacles on the floor could
block its wheels, thus causing it to overturn.
The two front wheels of the unit have brakes which can be locked to
ensure secure positioning. If the unit is steeply inclined or standing on a
slippery surface and lateral forces are acting on it, it may slide even
though the wheel brakes are locked.
➢ Always make sure that the unit's footprint is a flat, nonskid surface.
4 Safety
4.1 Basic safety information
13