Configuring Ssh - Spectracom SecureSync User Reference Manual

3.3 NETWORK Setup Pages
3.
Copy the text of the certificate and paste it into the Update X.509 PEM Certificate File
text field.
3.3.5

Configuring SSH

3.3.5.1 Accessing the SSH Setup Screen
To access the SSH Setup screen, navigate to MANAGEMENT > NETWORK > SSH Setup , or,
in the MANAGEMENT > NETWORK > Actions panel, select SSH .
74
NOTE – Only X.509 PEM Certificates can be loaded in this manner.
NOTE – The text inside the text field under the Edit X.509 PEM Certificate tab is edit-
able. However, changes should not be made to a certificate once it is imported.
Instead, a new certificate should be requested. An invalid certificate may result in
denial of access to the SecureSync through the Web UI. If this occurs, see "If a
Secure Unit Becomes Inaccessible" on page 225.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18