Procedure 12: Restoring Reference Priority Configuration (Optional) - Spectracom SecureSync User Reference Manual

5.7 Option Card Field Installation Guide
Figure 5-59:
SecureSync Web UI, ≥ Version 5.0
Open a web browser, log in to the SecureSync Web UI, and navigate to INTERFACES/OPTION
CARDS: The new card will be displayed in the SLOT list.
5.7.15 PROCEDURE 12: Restoring Reference Priority Configuration
(optional)
Prior to configuring the new card in the Web UI, the System Configuration Files need to be
restored, if you saved them under PROCEDURE 2 .
Please see "Restoring the System Configuration" on page 187 for how-to information.
Card-specific configuration instructions may be found in the Option Cards Guide, see "Option Card
Identification" on page 283.
444
Example STATUS/OUTPUTS page – SecureSync Web user interface
NOTE – If after an installation the card does not appear to be properly identified, it
may be necessary to update the SecureSync system software to the latest available
version.
CHAPTER •
5 SecureSync User Reference Guide Rev. 18