Viewing The Status Of A Gnss Reference - Spectracom SecureSync User Reference Manual

Determining your Altitude
Finding the altitude of your SecureSync's antenna position is not as crucial as finding the latitude
and longitude. Looking up the altitude for the general area, the city in which the SecureSync is loc-
ated in for example should be sufficient. If a more exact altitude is desired, then use a topo-
graphical map that supplies altitude information.
5.
3.6.16

Viewing the Status of a GNSS Reference

To view the current status of a GNSS reference:
1.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
NOTE – Should you prefer to determine your position in a different way, and as a con-
sequence, have your latitude & longitude data in degrees/minutes/seconds,
you need to convert this data, e.g. by using a conversion tool, such as Earth Point:
www.earthpoint.us/Convert.aspx
Click Submit to apply any changes you may have made.
Via INTERFACES > REFERENCES > GNSS Reference , navigate to the GNSS Refer-
ence.
3.6 OTHER Setup Pages
211